Compact Horizontal Split Tube Furnace - EST / EZS

Pobierz broszurę Arkusz danych
Close

Język:

EST 12/300

These compact universal split tube furnaces use free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility with the use of tube adapters the same furnace can be used with a variety of tube diameters.

The single zone EST and 3-zone EZS split tube furnaces comprise a furnace body which is hinged and split into two halves along its length. This makes exchange of work tubes easier and also enables the furnace to be used with reactors or work tubes where end flanges would make insertion into a non-split furnace difficult.

The 3-zone EZS furnaces provide excellent uniformity resulting from division of the heated length into 3 zones with its own controller and thermocouple. This range of tube furnaces does not include an integral work tube which must be selected as an additional item. The work tube length is dependent on the application, for example, for use with modified atmosphere or vacuum.

The use of a separate work tube has the advantage of protecting the heating elements from damage or contamination.

Cechy ogólne

  • 1200 °C maximum operating temperature
  • Carbolite Gero 301 controller, with single ramp to set-point & process timer
  • Heated lengths, single zone 150, 300, 450 or 600 mm (EST)
  • Heated lengths, 3-zone 450 or 600 mm (EZS)
  • Accepts work tubes with outer diameters up to 60 mm
  • elementy grzejne wykonane z wysokiej jakości drutu umieszczone wewnątrz formowanej próżniowo masie termicznej.
  • Furnace splits into two halves and accommodates tubes or samples fixed into a test rig
  • Outer mesh guard ensures operator safety

Opcje (proszę podać podczas zamawiania)

  • Szeroki zakres zaawansowanych kontrolerów cyfrowych oraz programowalnych rejestratorów, które mogą one być wyposażone w port komunikacyjny RS232, RS485 lub Ethernet 
  • Zabezpieczenie przed przekroczeniem maksymalnej temperatury
  • A range of additional work tubes, end seals and work tube packages is available for use with modified atmosphere and/or vacuum
  • Vacuum packages with a choice of rotary vane pump or turbomolecular pump are available for furnaces with tube inner diameters of 60 mm and above
  • Szeroki wybór rur roboczych
  • Wtyczki izolacyjne i dyski radiacyjne zapobiegające utracie ciepła oraz polepszającą jednorodność temperatury

Treść może ulec modyfikacji lub zmianie.